Pulled array continuous electrical sounding with an additional inductive source: an experimental design study

Electrical and electromagnetic profiling methods are used extensively in environmental geophysical investigations for many different purposes. The pulled array continuous electrical sounding (PACES) method, where a tail of electrodes is towed behind a small vehicle while continuously and simultaneously measuring several electrode configurations, has been used extensively for mapping the vulnerability of aquifers in Denmark. Measurements are taken every 1 m, and 10–15 km of profile can be achieved in one day.
This paper presents a theoretical study of the resolution capabilities of PACES measurements as they are now performed, and an experimental design study for including an inductive source in the measuring equipment. The joint interpretation of the galvanic data set of ordinary PACES measurements with inductive data from a horizontal magnetic dipole source will enhance the resolution capabilities of the data set significantly. The study is carried out as an analysis of the uncertainty of the model parameters of one-dimensional three-layer models using the estimation error variances of the inversion problem.
The results indicate that the addition of only two frequency data from a magnetic dipole source will substantially improve the resolution of the subsurface resistivity structure. The improvement is model dependent, but reduction in the relative error of model parameters by an order of magnitude is observed.