Measurements of the light flash produced by high velocity particle impact

The impact light flash produced by electrostatically accelerated iron particles with diameters meters ranging from 5 to 0.05 μm and velocities lying between 1 km/sec and 30 km/sec has been investigated by means of photomultipliers. As target materials mainly gold and tungsten were used. The pulse of the multiplier was registered directly and after electronic integration. The pulse height of the multiplier signal, the amplitude of the integrated signal as well as its rise time were found to be unique functions of the mass and velocity of the impacting particle. For the pulse height of the differential signal the relation I = c₁ × m^1.25 × v⁵ was obtained, and for the integrated signal the relation I = c₂ × m^1.25 × v^3.8, with only c₁ and C₂ depending on the target material. The rise time of the integrated signal follows the relation T = 2.2 × 10² × v^?0.4 using gold as target, and in the case of tungsten material follows the relation T = 9.8 × 10² × v^?1.2, where v is expressed in km/sec and T in μsec. Using the spectral distribution of the light intensity, measured by means of calibrated photomultipliers, the total amount of light energy emitted in the visible range could be calculated. As a result we obtained that for v = 4 km/sec and m = 10^?11 g about 3 × 10^?4 of the kinetic energy of the particle was converted into light energy. The variation of the impact flash intensity with the target material and the measured spectral distribution allowed the temperature of the crater after the impact to be estimated as between 2000 and 3000 K.