| Abstract: | When a structure is subjected to moderate to severe ground motions, a few excursions of the response yield level may take place following the reductions usually enforced in the design forces. These excursions are associated with progressive damage in the structure. Thus, a choice of the design level has to be suitably based on the maximum damage to be allowed in the structure. In this paper, a stochastic technique of developing damage-based non-linear spectra has been proposed for the aseismic design of those structures which can be idealized through Single-Degree-Of-Freedom (SDOF) oscillators. The proposed technique has been illustrated by obtaining the non-linear spectra which can possibly be used for a damage-based design. Along with the spectra, allowable ductility demand which should be supplied through proper sizing and detailing of the members and is compatible with the damage has also been specified. The non-linear SDOF oscillators have been approximated for this purpose by equivalent linear oscillators using a new stochastic linearization technique. The proposed linearization technique has been validated through simulation results in the case of an idealized, non-hysteretic, Elasto-Plastic (EP) model. |
