Processing map and well log data for geological and soil surveys

Design of a system which accepts geological maps or soil maps, together with corresponding well logs and produces interpretation maps, is described. The major aim was to get a processing program that would be useful at an operational scale that avoids the use of special purpose graphics hardware. This was achieved by using segment encoding of lines and by treatment of mapped units as basic graphical units (atoms). The system operation was split into an input phase and a processed phase. Input- and file-building require some technical experience, but are a one-time affair, whereas subsequent processing requires less (graphical) resources and experience, but is of a repetitive nature. When writing processing programs, emphasis was placed on ease of adding options. Clever improvements of efficiency (e.g., disk traffic) were not deemed worthwhile or even wise. Two driving forces behind the project required the programs reported here. First was the observation that digital data can be used only if appropriate programs are readily available to produce required results without need for large investments in hardware. Second was the idea that digital tools could be most effective if they allow the end-user (customer) to interact directly with the full base of data without recourse to technical experts. The resulting system is operational and running on a VAX 11/750, coded in FORTRAN.