Origin and evolution of polygonal cracks in hydrous sulphate sands,White Sands National Monument,New Mexico

The nucleation and propagation of polygonal cracks in hydrous sulphate dunes at White Sands National Monument, New Mexico, are affected by water availability, transport through the sand and exchange with the atmosphere. These gypsum sands are cohesive enough to crack due to capillary forces and gypsum cements formed during evaporation. Surface cracks form five‐sided polygons with a variety of triple‐junction angles. Cracks extend down to variable depths and polygons increase in size with depth, showing a maturation similar to experimentally produced polygonal columns in drying corn starch. Results from two years of monitoring crack geometries, temperature and humidity demonstrate that cracks form when water is lost to the atmosphere through the transport of water vapour. Subsurface relative humidity below 5 to 10 cm is almost always maintained at 100% by the evaporation and condensation of water in thin films on grains. The amplitude of daily temperature and thus absolute humidity changes decreases with depth, consistent with lower evaporation and condensation rates with increasing depth. Changes in absolute humidity and the contrast between humidity in pore spaces versus the overlying atmosphere result in significant water loss from the dunes except during times of precipitation and frost/dew condensation. This water loss allows cracks to nucleate and propagate into the dunes. This study hypothesizes that crack tips propagate into sand to the depth at which thin films of water on grains are drying, and that this depth varies from the surface of the dune during precipitation events to depths greater than 45 cm when dunes are drier.