The physical, chemical and mineralogical properties of three cemented layers within sulfide-bearing mine tailings

The oxidation and subsequent dissolution of sulfide minerals within mine tailings impoundments releases H⁺, Fe(II), SO₄ and trace elements to the tailings pore water. Subsequent pH-buffering and hydrolysis reactions result in the precipitation of secondary phases such as gypsum, goethite and jarosite. In areas of intense precipitation, cemented layers or “hardpans” often form within the shallow tailings. Three cemented layers within pyrrhotite-bearing mine tailings at the Fault Lake, Nickel Rim and East Mine impoundments located near Sudbury, Canada, were examined. The location of the three cemented layers within the tailings stratigraphy varies as does their location relative to the water table. The morphology, mineralogy and chemical composition of the cemented layers also vary between sites. The bulk density within the three cemented layers all showed an increase relative to the surrounding uncemented tailings ranging from 9% to 29%. The porosity of each cemented layer decreased relative to the surrounding uncemented tailings ranging from an 8% to 18% decrease. The cemented layers also showed relative enrichment of total sulfur, carbon and trace elements relative to the surrounding uncemented tailings. Arsenic concentrations showed an enrichment in the cemented layers of up to 132%, Cd up to 99%, Co up to 84%, Cu up to 144%, Ni up to 693% and Zn up to 145% relative to the surrounding uncemented tailings. All the cemented layers studied show an evolution of the secondary phases with time from a gypsum–jarosite-based cement to a goethite-rich cement. The formation of these layers could potentially have a significant effect on the environmental impacts of sulfide-bearing mine waste.