首页 | 本学科首页   官方微博 | 高级检索  
     

Hydrodynamic Forces on Smooth Inclined Cyh''''nders in Oscillatory Flow
作者单位:Kang Haigui Asscociate Professor,Department of Civil Engineering,Dalian University of Technology,Dalian 116023
摘    要:-The hydrodynamic forces on a smooth inclined circular cylinder exposed to oscillating flow were experimentally investigated at Reynolds number (Re) in the range 40000-200000 and Keulegan-Capenter number (KC) in the interval from 5-40. In the test, Re number and KC number were varied systematically. The inertia force coefficient (Cu) and the drag force coefficient (CD) in Morison equation were determined from the measured loads and the water particle kinematics. In this analysis a modified form of Morison equation was used since it uses the normal velocity and acceleration. Thus, the applicability of the Cross Flow Principle was assumed. This principle, simply stated, is as follows: the force acting in the direction normal to the axis of a cylinder placed at some oblique angle with the direction of flow is expressed in terms of the normal component of flow only, and the axial component is disregarded. Both the total in-line force coefficient (CF) and transverse force (lift) coefficient (Cf) were analyzed


Hydrodynamic Forces on Smooth Inclined Cyh''''nders in Oscillatory Flow
Kang Haigui Asscociate Professor. Hydrodynamic Forces on Smooth Inclined Cyh''''nders in Oscillatory Flow[J]. China Ocean Engineering, 1994, 0(3)
Authors:Kang Haigui Asscociate Professor
Affiliation:Kang Haigui Asscociate Professor,Department of Civil Engineering,Dalian University of Technology,Dalian 116023
Abstract:-The hydrodynamic forces on a smooth inclined circular cylinder exposed to oscillating flow were experimentally investigated at Reynolds number (Re) in the range 40000-200000 and Keulegan-Capenter number (KC) in the interval from 5-40. In the test, Re number and KC number were varied systematically. The inertia force coefficient (Cu) and the drag force coefficient (CD) in Morison equation were determined from the measured loads and the water particle kinematics. In this analysis a modified form of Morison equation was used since it uses the normal velocity and acceleration. Thus, the applicability of the Cross Flow Principle was assumed. This principle, simply stated, is as follows: the force acting in the direction normal to the axis of a cylinder placed at some oblique angle with the direction of flow is expressed in terms of the normal component of flow only, and the axial component is disregarded. Both the total in-line force coefficient (CF) and transverse force (lift) coefficient (Cf) were analyzed in terms of their maximum and root mean square values. All the in-line and lift force coefficients were given as a functions of Re and KC number. F'rom this research, it can be seen that the Cross-Flow Principle does not always work well. It seems valid for the total in- line force at high Re and large KC numbers. The Cu for a = 45 is larger and the CD for a = 45 is smaller than that for a = 90 ?and Re> 80000. The hydrodynamic force coefficients CD and Cu for the inclined cylinder are only the functions of the oblique angle (a) and KC number, but not of the Re number.
Keywords:wave forces   hydrodynamic forces   inclined cylinder   oscillatory fow
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号