Correlations of peak acceleration,velocity and displacement with earthquake magnitude,distance and site conditions

A brief review of proposed correlations between peak accelerations and earthquake magnitude and distance has been presented. It has been found that most investigators agree favourably on what should be the amplitude of peak accelerations for the distance range between about 20 and 200 km. For distances less than 20 km, there is significant disagreement in the predicted peak amplitudes, reflecting the lack of data there and the uncertainties associated with the extrapolation. Correlations of peak accelerations, peak velocities and peak displacements with earthquake magnitude, epicentral distance and the geologic conditions of the recording sites have been presented for 187 accelerograms recorded during 57 earthquakes. This data set describes strong earthquake ground motion in the Western United States during the period from 1933 to 1971. For large earthquakes, dependence of peak acceleration, velocity and displacement amplitudes on earthquake magnitude seems to be lost. This suggests that the amplitudes of strong ground motion close to a fault are scaled primarily by the maximum dislocation amplitudes and the stress drop, rather than the overall ‘size’ of an earthquake as measured by magnitude. The influence of geologic conditions at the recording station seems to be of minor importance for scaling peak accelerations, but it becomes noticeable for the peaks of velocity and even more apparent for the peaks of displacement.