Structure and properties of loaded silica contacts during pressure solution: impedance spectroscopy measurements under hydrothermal conditions |
| |
Authors: | R van Noort C J Spiers C J Peach |
| |
Institution: | (1) High Pressure and Temperature Laboratory, Department of Earth Sciences, Utrecht University, P.O. Box 80.021, 3508 TA Utrecht, The Netherlands |
| |
Abstract: | In order to investigate directly the structure and properties of grain boundaries in silicate materials undergoing pressure
solution, in situ measurements of these properties are required. We report electrical impedance spectroscopy measurements,
performed, under hydrothermal conditions, on individual glass–glass and glass-quartz contacts undergoing pressure solution.
Resulting estimates of the average grain boundary diffusivity product (
Z = Dd\textav C* Z = D\delta_{\text{av}} C^{*} ) for silica transport and of the average grain boundary fluid film thickness (
d\textav \delta_{\text{av}} ) fall in the ranges 6.3 ± 1.4 × 10−18 m3 s−1 and 350 ± 210 nm, respectively. However, the average values for Z and
d\textav \delta_{\text{av}} obtained were likely influenced by cracking and irregular dissolution of the dissolving contact surfaces, rather than representing
uniformly wetted grain boundary properties. Post-mortem SEM observations indicate that the contact surfaces were internally
rough. Taken together, our data support the notion that during pressure solution of quartz, grain boundary diffusion is rapid,
and interface processes (dissolution and precipitation) are more likely to be rate-limiting than diffusion. |
| |
Keywords: | |
本文献已被 SpringerLink 等数据库收录! |
|