On the use of microtremor recordings in seismic microzonation

Experimental methods involving microtremor recordings are useful for determining site effects in regions of moderate seismic activity where ground motion records are few, and in urban or industrial contexts where the noise level is high. The aim of this study is to establish a microzonation by using the Nogoshi–Nakamura method,[1, 2] a simple experimental technique based on microtremor recordings. Since the physical phenomena underlying the method are only partially understood, the spectral responses obtained cannot be used alone. We, therefore, complete our experimental results by comparing them with the solutions of a one-dimensional numerical simulation (SHAKE91).[3, 4] The experimental programme was carried out on a plain near the Rhone Delta (South of France). H/V spectral ratios were calculated at 137 noise measurement points. In addition, we were able to compute the numerical transfer functions from soil columns defined by geotechnical characteristics inside the studied region. A comparison of the results obtained by the experimental and numerical methods showed that the fundamental frequencies are in good agreement, but that the amplitudes obtained by the two techniques are sometimes different. The analysis of H/V spectral ratios enabled us to establish maps to characterize the region: a resonance frequency map and maps of amplification levels as a function of frequency range, leading to a seismic microzonation for the whole of the region.