首页 | 本学科首页   官方微博 | 高级检索  
     

节理岩体超声测试及单轴压缩试验研究
引用本文:孙旭曙,李建林,王乐华,陈兴周,李飞,程冬. 节理岩体超声测试及单轴压缩试验研究[J]. 岩土力学, 2014, 35(12): 3473-3478
作者姓名:孙旭曙  李建林  王乐华  陈兴周  李飞  程冬
作者单位:1.三峡大学 水利与环境学院,湖北 宜昌 443002;2.三峡大学 土木与建筑学院,湖北 宜昌 443002; 3.西安科技大学 建筑与土木工程学院,陕西 西安 710056
基金项目:国家自然科学基金资助项目(No. 51279091,No. 51309141,No. 51109120,No. 51309142);水利部公益基金项目(No. 201401029);三峡大学科学基金(No. KJ2013B074)。
摘    要:为了获取节理岩体各向异性力学特性和声波传播规律的相互关系,通过制作圆柱形单一预制贯通节理试件,开展了7种不同倾角节理试件的超声波波速测试和单轴压缩试验。试验结果表明:(1)节理试件波速测试值离散性较大,但总体服从正态分布,波速平均值介于石膏试件和完整试件之间,波速随节理倾角增大呈线性递减;(2)不同倾角的节理面对节理试件力学特性的影响很大,在应力-应变关系、变形特征、强度特征和破坏模式上均表现出显著的各向异性特征;(3)节理试件的力学性质和超声波传播特性变化规律区别很大,采用超声波波速确定节理试件的力学参数会存在很大误差。

关 键 词:节理岩体  超声波测试  单轴压缩试验  各向异性  力学特性  
收稿时间:2013-08-01

Study of ultrasonic test and uniaxial compression test of jointed rock masses
SUN Xu-shu,LI Jian-lin,WANG Le-hua,CHEN Xing-zhou,LI Fei,CHENG Dong. Study of ultrasonic test and uniaxial compression test of jointed rock masses[J]. Rock and Soil Mechanics, 2014, 35(12): 3473-3478
Authors:SUN Xu-shu  LI Jian-lin  WANG Le-hua  CHEN Xing-zhou  LI Fei  CHENG Dong
Affiliation:1. College of Hydraulic & Environmental Engineering, China Three Gorges University, Yichang, Hubei 443002, China; 2. College of Civil Engineering and Architecture, China Three Gorges University, Yichang, Hubei 443002, China; 3. College of Civil and Architecture Engineering, Xi'an University of Science and Technology, Xi’an, Shaanxi 710056, China
Abstract:In order to obtain interrelation between anisotropic mechanical characteristics of jointed rock masses and ultrasonic propagation variation, by making the cylinder samples with a precasted joint surface, the ultrasonic test and uniaxial compression test of jointed samples with 7 joint dips are conducted. The results show: (1) The ultrasonic wave velocity test values of jointed samples are discretization and obey the normal distribution. The average of wave velocity is between the intact samples and the gypsum samples, and decreases linearly with increase of joint dip. (2) The joint surface with various joint dips has a great influence on mechanical characteristics of jointed samples, so it has remarkable characteristics of anisotropy in stress-strain curve, deformation, strength and failure modes. (3) There is large difference between the mechanical characteristics of jointed samples and the ultrasonic wave propagation variation, and it will have a great error to determine the mechanical parameters via the ultrasonic wave velocity.
Keywords:jointed rock masses  ultrasonic test  uniaxial compression test  anisotropy  mechanical characteristics
本文献已被 CNKI 等数据库收录!
点击此处可从《岩土力学》浏览原始摘要信息
点击此处可从《岩土力学》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号