Improved Platinum-Group Element Extraction by NiS Fire Assay from Chromitite Ore Samples Using a Flux Containing Sodium Metaphosphate

Many chromite-rich rocks contain relatively high concentrations of the platinum-group elements (PGE). In many cases, the phases carrying PGE occur as either platinum-group minerals (PGM) or as base metal sulfides in solid solution in sulfides. In some cases, such as the UG-2 unit of the Bushveld Complex, the PGM are occluded inside chromite grains. Chromites are notably difficult to dissolve in most fluxes and if the chromite contains some PGM the possibility exists that not all the PGE will be recovered during fusion. In this work, shortcomings in published methods of analysis based on the nickel sulfide fire assay procedure were investigated and a new procedure developed based on the addition of sodium metaphosphate to the fusion mixture. Optimum composition of the fusion mixture was found to be 10 g sodium metaphosphate and 9 g silica to 10 g sample, 15 g sodium carbonate, 30 g lithium tetraborate, 7.5 g nickel and 4.5 g sulfur to achieve complete dissolution of chromite grains. The new flux mixture was evaluated by the analysis of reference material CHR-Pt+ (which is known to contain PGM inside chromite grains) and no undissolved chromite grains were found in the glassy slag. Analysis of the nickel sulfide beads from this fire assay using neutron activation analysis showed similar results for Rh and Ru when compared with published conventional true (or accepted) values, while Au, Ir, Os, Pd and Pt values determined here were 10 to 30% higher than the corresponding published conventional true values. It was concluded that the addition of sodium metaphosphate improved chromite dissolution in the flux and appears to improve PGE recovery.