| NP6-1井PDC钻头断落处理与认识 |
| |
| 引用本文： | 褚道余,郝和伢.NP6-1井PDC钻头断落处理与认识[J].海洋地质译丛,2012(2):87-89. |
| |
| 作者姓名： | 褚道余 郝和伢 |
| |
| 作者单位： | [1]中国石化集团上海海洋石油局海洋石油工程技术研究院,上海200120 [2]中国石化集团上海海洋石油局,上海200120 |
| |
| 摘 要： | 随着PDC钻头的广泛使用，因PDC钻头选型与钻遇地层的不匹配，或PDC钻头本身质量问题，也遇到一些井下复杂情况。此文介绍NP6-1井在311．2mm井段使用PDC钻头钻至井深2878．76m时，PDC钻头从公扣根部折断留在井底，加工公锥和采取适当措施成功地打捞出落鱼，避免侧钻，挽回了经济损失。该井成功打捞出PDC钻头，为同类型的井下落鱼或小落鱼提供参考与借鉴。
|
| 关 键 词： | 海洋钻井 PDC钻头 断落 打捞 公锥 |
Treatment and Knowledge about the Broken of PDC Bit in Well NP6-1 |
| |
| Authors: | CHU Daoyu HAO Heya |
| |
| Institution: | (Engineering Technology Institute, SINOPEC Shanghai Offshore Petroleum Bureau, Shanghai 200120, China, 2. SINOPEC Shanghai Offshore Petroleum Bureau, Shanghai 200120, China) |
| |
| Abstract: | With wide usage of PDC bit, downhole complex situations happen because the type of PDC bit is not suited to formation characteristic, or the quality of PDC bit is not good. In this paper, the complex situation of PDC bit broken off while drilling 311.2 mm hole to 2 878.76 m in Well NP6-1 has been discussed, the fish of PDC bit is taken out of hole by using the taper tap machined as per the fish at the bottom of hole, and avoid losing money from well side track. The experience can provide a good reference to the same kind offish accident or similar to fish accident. |
| |
| Keywords: | offshore drilling PDC bit break off fishing taper tap |
| 本文献已被 维普 等数据库收录！ |
|
