Three-dimensional finite-element modelling of magnetotelluric data with a divergence correction

A finite-element method for computing the electric field in a 3-D conductivity model of the Earth for plane wave sources, thus enabling magnetotelluric responses to be calculated, is presented. The method incorporates in the iterative solution of the electric-field system of equations the divergence correction technique introduced for finite-difference solutions by Smith (1996). The correction technique accelerates the development of the discontinuity of the normal component of the approximate electric field across conductivity discontinuities. The convergence rate of the iterative solution is improved significantly, especially for low frequencies. The correction technique involves computing the divergence of the current density for the approximate electric field, computing the static potential whose source is this divergence of the current density, and ‘correcting’ the approximate electric field by subtracting from it the gradient of the potential. This is repeated at regular intervals during the iterative solution of the electric-field system of equations. For the method presented here, the Earth model is discretised using a rectilinear mesh comprising uniform cells. Edge-element basis functions are used to approximate the electric field and nodal basis functions are used to approximate the correction potential. The Galerkin method is used to derive the systems of equations for the approximate electric field and correction potential from the respective differential equations. A bi-conjugate gradient solver was found to be adequate for the system of equations for the correction potential; a generalised minimum residual solver was found to be better for the electric-field system of equations. The method is illustrated using the COMMEMI 3D-1A and 3D-2A models.