首页 | 本学科首页   官方微博 | 高级检索  
     

利用地质统计学方法模拟岩石裂隙网络的三维空间分布——以云南个旧高松矿田为例
引用本文:刘春学,倪春中,燕永锋,谭喨. 利用地质统计学方法模拟岩石裂隙网络的三维空间分布——以云南个旧高松矿田为例[J]. 地球学报, 2013, 34(3): 347-353
作者姓名:刘春学  倪春中  燕永锋  谭喨
作者单位:云南财经大学城市与环境学院;昆明理工大学国土资源工程学院;昆明理工大学国土资源工程学院;云南财经大学城市与环境学院
基金项目:国家自然科学基金项目“地学中方向性变量的多尺度空间分布模拟”(编号: 40902058)
摘    要:裂隙在地学的诸多领域中均具有重要意义,其空间分布可以使用地质统计学方法进行模拟,同时考虑裂隙的方向(走向和倾角)。利用序贯高斯模拟方法可以估计裂隙密度的空间分布,并根据裂隙密度数值随机产生裂隙位置的空间分布。裂隙方向被划分成若干(非)均等的方向组,将裂隙方向归属到其所属方向组,表示为由若干二值变量组成的指示形式,0和1分别代表该裂隙方向不属于和属于该组。为了便于计算,减少方向指示变量的成分数目,使用主成分分析法求出方向指示变量的主成分,用普通克里格法估计各主成分的空间分布。把估计结果反演为原始的指示形式,并找出其中数值最大的方向组且将其赋值为1。按照对应方向组内裂隙方向的累积密度函数,随机产生裂隙的方向。根据估计结果,将符合一定距离和角度标准的裂隙元连接为一个裂隙面,从而形成裂隙网络。根据在云南个旧锡矿高松矿田白云岩中进行裂隙网络模拟的应用,可见该方法由于组合了序贯高斯模拟法、普通克里格法和主成分分析法,可以较好地对岩石裂隙位置和方向进行合理的模拟。

关 键 词:裂隙网络  三维空间分布  地质统计学  个旧锡矿

Three-dimensional Simulation of Rock Fractures by Geostatistical Method: A Case Study of Gaosong Field in Yunnan Province
LIU Chun-xue,NI Chun-zhong,YAN Yong-feng and TAN Liang. Three-dimensional Simulation of Rock Fractures by Geostatistical Method: A Case Study of Gaosong Field in Yunnan Province[J]. Acta Geoscientica Sinica, 2013, 34(3): 347-353
Authors:LIU Chun-xue  NI Chun-zhong  YAN Yong-feng  TAN Liang
Affiliation:School of Urban and Environment, Yunnan University of Finance and Economics;Faculty of Land Resources Engineering, Kunming University of Science and Technology;Faculty of Land Resources Engineering, Kunming University of Science and Technology;School of Urban and Environment, Yunnan University of Finance and Economics
Abstract:The simulation of fracture distribution is an important problem in various fields of geosciences. To simulate the spatial distribution of fracture networks, this paper proposes a geostatistical method in consideration of their di-rections (strikes and dips). Fracture locations are generated randomly, following fracture density values assigned by sequential Gaussian simulation method. Fracture direction is divided into n equal (or unequal) groups, and sample fracture directions are assigned to its corresponding group. Then sample fracture directions are transformed into indicators consisting of n binary variables, where 1 and 0 represents belonging to and not belonging to this group. For calculation convenience, the indicator number is reduced by using the principal component analysis. Then ordinary kriging is employed to estimate the distributions of these principal components. The results are inversed to the original indicator form, and the biggest one is assigned as 1 while the others are assigned as 0. Fracture directions are generated randomly by using the cumulative distribution function of the biggest group. Based on these simulated results, fracture elements can be determined with location and direction. At last, fracture elements within the angle and distance tolerances are connected to be one fracture. The case study of the fracture data in Gejiu dolomite of southeast Yunnan Province shows that the combination of sequential Gaussian simulation, ordinary kriging and principal component analysis can provide a reasonable simulation result for locations and directions of fractures.
Keywords:fracture network   three dimensional distribution   geostatistics   Gejiu tin mine
本文献已被 CNKI 等数据库收录!
点击此处可从《地球学报》浏览原始摘要信息
点击此处可从《地球学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号