首页 | 本学科首页   官方微博 | 高级检索  
     

钢板剪力墙结构基本自振周期简化计算研究
引用本文:王海东,张时如,周亮,曾裕林. 钢板剪力墙结构基本自振周期简化计算研究[J]. 地震工程与工程振动, 2012, 32(3): 79-85
作者姓名:王海东  张时如  周亮  曾裕林
作者单位:1. 湖南大学土木工程学院,湖南长沙410082;湖南大学建筑安全与节能教育部重点实验室,湖南长沙410082
2. 湖南大学土木工程学院,湖南长沙,410082
基金项目:国家自然科学基金,湖南省普通高校青年骨干教师培养计划,湖南大学青年教师成长计划
摘    要:本文针对钢板剪力墙结构自振周期缺乏研究的现状,将钢板剪力墙简化为Timoshenko梁,提出了考虑周边框架影响的钢板剪力墙等效抗剪刚度计算的方法,然后根据Southwell-Dunkerley理论,给出了钢板剪力墙结构基本自振周期的简化计算公式。然后,通过56个算例比较分析了本文公式计算结果与有限元计算结果发现:本文公式计算结果与有限元结果之比的平均值为1.015,标准差为0.049,说明本文公式具有足够的可靠性。接着,又对结构高度、均布质量、等效抗剪、抗弯刚度、钢板的高厚比、高宽比等参数进行了分析,分析结果表明:随着结构高度与均布质量开方的乘积增大,结构的基本自振周期增长;层数相同时,随着等效抗剪刚度、抗弯刚度的增大,周期有减小的趋势;层数相同时,随着钢板高厚比与高宽比乘积的增大,周期增长。

关 键 词:钢板剪力墙结构  基本自振周期  简化计算方法

Simplified calculating method of fundamental natural periods for steel plate shear wall structures
WANG Haidong , ZHANG Shiru , ZHOU Liang , ZENG Yulin. Simplified calculating method of fundamental natural periods for steel plate shear wall structures[J]. Earthquake Engineering and Engineering Vibration, 2012, 32(3): 79-85
Authors:WANG Haidong    ZHANG Shiru    ZHOU Liang    ZENG Yulin
Affiliation:1 (1.College of Civil Engineering,Hunan University,Changsha 410082,China;2.Key Laboratory of Building Safety and Energy Efficiency,Ministry of Education,Changsha 410082,China)
Abstract:Due to the lack of the research on fundamental natural periods for steel plate shear wall structures(SPSW),the SPSW is simplified as a Timoshenko’s beam and the formula of equivalent shear stiffness of SPSW,which includes the effect of adjacent frame columns,is put forward.Then based on Southwell-Dunkerley approximation,the simplified calculating method of natural periods for SPSW structures can be obtained.By 56 cases,the results of the simplified calculating method are compared with those of finite element analysis and the results show that average value,which is the period normalized by the period from FE analysis,is 1.015 and the standard deviation is 0.049.The simplified calculating method is reliable enough.Moreover,the parameters including height,unity mass,equivalent shear stiffness and flexural stiffness,ratio of height to width of steel plate,ratio of height to thickness,etc are analyzed.The results show that with the increasing of the product of height and the square root of unity mass,the fundamental natural period will increase;with the increasing of equivalent shear stiffness and flexural stiffness,the fundamental natural period will tend to decrease if the number of story is the same;with the product of ratio of height to width of steel plate and ratio of height to thickness,the fundamental natural period will lengthen if the number of story is the same.
Keywords:steel plate shear wall  fundamental natural period  simplified calculating method
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号