Analysing two‐dimensional effects in central loop transient electromagnetic sounding data using a semi‐synthetic tipper approach

We present a simple and feasible approach to analyse and identify two‐dimensional effects in central loop transient electromagnetic sounding data and the correspondingly derived quasi two‐dimensional conductivity models. The proposed strategy is particularly useful in minimising interpretation errors. It is based on the calculation of a semi‐synthetic transient electromagnetic tipper at each sounding and for each observational transient time point. The semi‐synthetic transient electromagnetic tipper is derived from the measured vertical component of the induced voltage and the synthetically calculated horizontal component. The approach is computationally inexpensive and involves one two‐dimensional forward calculation of an obtained quasi two‐dimensional conductivity section. Based on a synthetic example, we demonstrate that the transient electromagnetic tipper approach is applicable in identifying which transient data points and which corresponding zones in a derived quasi two‐dimensional subsurface model are affected by two‐dimensional inhomogeneities. The one‐dimensional inversion of such data leads to false models. An application of the semi‐synthetic transient electromagnetic tipper to field data from the Azraq basin in Jordan reveals that, in total, eight of 80 investigated soundings are affected by two‐dimensional structures although the field data can be fitted optimally using one‐dimensional inversion techniques. The largest semi‐synthetic tipper response occurs in a 300 m‐wide region around a strong lateral resistivity contrast. The approach is useful for analysing structural features in derived quasi two‐dimensional sections and for qualitatively investigating how these features affect the transient response. To avoid misinterpretation, these identified zones corresponding to large tipper values are excluded from the interpretation of a quasi two‐dimensional conductivity model. Based on the semi‐synthetic study, we also demonstrate that a quantitative interpretation of the horizontal voltage response (e.g. by inversion) is usually not feasible as it requires the exact sensor position to be known. Although a tipper derived purely from field data is useful as a qualitative tool for identifying two‐dimensional distortion effects, it is only feasible if the sensor setup is sufficiently accurate. Our proposed semi‐synthetic transient electromagnetic tipper approach is particularly feasible as an a posteriori approach if no horizontal components are recorded or if the sensor setup in the field is not sufficiently accurate.