首页 | 本学科首页   官方微博 | 高级检索  
     


Numerical simulation of dynamic characteristics of a cable-stayed aqueduct bridge
Authors:Yuchun Li  Qingshuang Di
Affiliation:[1]Department of Hydraulic Engineering, Tongji University, Shanghai 200092, China [2]Research Institute of Structural Engineering and Disaster Reduction, Tongji University, Shanghai 200092, China
Abstract:In this paper, a full-scale 3-D finite element model of the Jundushan cable-stayed aqueduct bridge is established with ANSYS Code. The shell, fluid, tension-only spar and beam elements are used for modeling the aqueduct deck, filled water, cables and support towers, respectively. A multi-element cable formulation is introduced to simulate the cable vibration. The dry (without water) and wet (with water) modes of the aqueduct bridge are both extracted and investigated in detail. The dry modes of the aqueduct bridge are basically similar to those of highway cable-stayed bridges. A dry mode may correspond to two types of wet modes, which are called the in-phase (with lower frequency) and out-of-phase (with higher frequency) modes. When the water-structure system vibrates in the in-phase/out-of-phase modes, the aqueduct deck moves and water sloshes in the same/opposite phase-angle, and the sloshing water may take different surface-wave modes. The wet modes of the system reflect the properties of interaction among the deck, towers, cables and water. The in-phase wet frequency generally decreases as the water depth increases, and the out-of-phase wet frequency may increase or decrease as the water depth increases.
Keywords:cable-stayed  aqueduct bridge  dynamic characteristics  fluid-structure interaction  numerical simulation
本文献已被 CNKI 维普 万方数据 SpringerLink 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号