| 原位AlN/AZ91镁基复合材料轧制及热处理工艺研究 |
| |
| 引用本文： | 赵东辰,陈稳.原位AlN/AZ91镁基复合材料轧制及热处理工艺研究[J].盐湖研究,2021,29(3):47-55. |
| |
| 作者姓名： | 赵东辰 陈稳 |
| |
| 作者单位： | 青海省化工设计研究院有限公司,青海西宁 810007;青海民族大学物理与电子信息工程学院,青海西宁 810007 |
| |
| 摘 要： | 对前期制备出的原位AlN/AZ91镁基复合材料进行轧制及热处理工艺研究,利用X-ray衍射仪(XRD)、扫描电镜(SEM)、光学显微镜(OM)、能谱仪(EDS)等对不同轧制及热处理工艺条件下镁基复合材料轧制板材的微观组织进行表征,并对复合材料进行室温拉伸力学性能测试和分析.结果表明:通过优化轧制及热处理工艺,显著改善了...
|
| 关 键 词： | 镁合金 复合材料 轧制 热处理 力学性能 |
| 收稿时间： | 2021/3/19 0:00:00 |
| 修稿时间： | 2021/4/20 0:00:00 |
Study on Rolling and Heat Treatment Processing of In-situ AlN/AZ91 Magnesium Matrix Composites |
| |
| ZHAO Dong-chen,CHEN Wen.Study on Rolling and Heat Treatment Processing of In-situ AlN/AZ91 Magnesium Matrix Composites[J].Journal of Salt Lake Research,2021,29(3):47-55. |
| |
| Authors: | ZHAO Dong-chen CHEN Wen |
| |
| Institution: | Qinghai university |
| |
| Abstract: | In this study,the rolling and heat treatment processing of AlN / AZ91 matrix composites were studied.The microstructure of the rolled sheets were characterized by X-ray diffraction(XRD),scanning electron microscope(SEM),optical microscope(OM)and energy dispersive spectrometer(EDS),and the mechanical properties of the composite were also analyzed.The results showed that significant improvements of microstructure was obtained by optimizing rolling and heat treatment process,then the higher ultimate tensile strengths(358 MPa)and the higher fracture elongations(5.4%)were simultaneously improved for AlN / AZ91 composites. |
| |
| Keywords: | |
|
| 点击此处可从《盐湖研究》浏览原始摘要信息 |
| 点击此处可从《盐湖研究》下载免费的PDF全文 |
|
