Increasing of efficiency of desulphurisation processes of coals during thermal destruction

As is well known, a high content of sulphur in coals is an effect of the post-depositional history of coal seams and one of the most important criteria of its use as a fuel. Sulphur in coals can cause a serious environmental and technological problem during their utilization. This problem is very actual for the Donetsk Basin because 734 mined seams out of the total of 1009 （73%） are comprised of coals with sulphur content -2%. The chemical pre-treatment as a first stage in their processing is widely used in order to effectively obtain the thermal destruction products of coals （such as semi-coke, coke, adsorbents, etc.） and to simultaneously utilize coal wastes. Development in pre-treatment methods for high-sulphur, low-rank coals is especially desirable for reducing the sulphur contents of the solid products. The aim of the present work is to investigate the influence of coal pre-treatment on the yield and composition of thermal destruction products, and the sulphur distribution among different components of the coals of different genetic types by reductivity （low-reduced LRC and reduced RC coals）. The thermal behavior of the coals was studied by means of the Fisher method （heated to 520℃, at a rate of 7℃/min）. The composition of the semi-coking gas was investigated by means of a VTI gas analyzer. The coal samples were chemically treated directly before thermal destruction by the introduction of 1-% solutions of radical polymerization initiator AAD （acrylic acid dinitrile C8H12N4） and products of coal-tar distillation （absorber oil）. Coal pre-treatment increases the semi-coke yield and its coking ability, and changes the liquid/gaseous product ratio.

Increasing of efficiency of desulphurisation processes of coals during thermal destruction