首页 | 本学科首页   官方微博 | 高级检索  
     检索      

某金矿水平绳索取心钻进钻头选型及试验分析
引用本文:刘勇,常江华.某金矿水平绳索取心钻进钻头选型及试验分析[J].探矿工程,2011,38(7):73-75.
作者姓名:刘勇  常江华
作者单位:中煤科工集团西安研究院,陕西西安710077
摘    要:为探明矿产储量和矿带产状,进行了水平绳索取心钻进试验。由于试验场地地质条件复杂,钻头不能很好的适应地层,未取得理想钻进效果。通过对绳索取心钻头的选型试验,重点分析了水平钻进对钻头的影响。结合完孔后的钻孔轨迹,逆向分析了水平钻进与钻孔轨迹的关系。选出了适合该矿区的钻头,并提出了钻头的改进方法及防止钻孔弯曲的建议。

关 键 词:水平孔  绳索取心  孕镶金刚石钻头  钻孔轨迹
收稿时间:2010/12/21 0:00:00
修稿时间:2011/3/20 0:00:00

Selection of Horizontal Wire-line Coring Bit in a Gold Mine and the Test Analysis
LIU Yong and CHANG Jiang-hua.Selection of Horizontal Wire-line Coring Bit in a Gold Mine and the Test Analysis[J].Exploration Engineering(Drilling & Tunneling),2011,38(7):73-75.
Authors:LIU Yong and CHANG Jiang-hua
Institution:(Xi'an Research Institute of China Coal Technology and Engineering Group Corp.,Xi'an Shaanxi 710077,China)
Abstract:To prove the mineral reserves and the occurrence of mineralization belt,wire-ling coring drilling test was made.Because of the complex geological conditions,the used bit was not well adapted to make good drilling results.Through the selection test of impregnated diamond bit and the drilling track,analysis was made on the impact of horizontal drilling on the bit.Based on the borehole track,reverse analysis was made on the relationship of horizontal drilling and borehole track,suitable bit for the mine geological conditions was selected with improvement methods and suggestions on preventing hole bending put forward.
Keywords:horizontal borehole  wire-line coring  impregnated diamond bit  drilling track
本文献已被 维普 等数据库收录!
点击此处可从《探矿工程》浏览原始摘要信息
点击此处可从《探矿工程》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号