首页 | 本学科首页   官方微博 | 高级检索  
     

机械封孔式注浆器橡胶筒非线性有限元分析
引用本文:范成洲, 黄华元, 刘振兴, 丁伯成, 王发林. 机械封孔式注浆器橡胶筒非线性有限元分析[J]. 煤田地质与勘探, 2014, 42(5): 96-99. DOI: 10.3969/j.issn.1001-1986.2014.05.019
作者姓名:范成洲  黄华元  刘振兴  丁伯成  王发林
作者单位:1.西北核技术研究所, 陕西西安 710065
摘    要:橡胶筒作为机械封孔式注浆器的关键元件,其在钻孔内的轴向压缩变形过程同时具有多重非线性特点。应用有限元软件分析表明:随着轴向压缩位移的增加,橡胶筒先与孔壁产生接触,后与内管外壁产生接触,最后会发生挤出变形。为达到较好的封堵效果及保证橡胶筒的回弹性能,压缩位移应控制在17.8~19.4 mm。现场应用显示:依此范围控制注浆器的压缩量,取得了较好的封堵效果,且有效延长了橡胶筒的使用寿命,提高了注浆器的可靠性。

关 键 词:注浆器  橡胶筒  非线性  有限元
收稿时间:2014-01-09

Nonlinearity finite element analysis of rubber cylinder ring around the grout injector with mechanical sealing
FAN Chengzhou, HUANG Huayuan, LIU Zhenxing, DING Bocheng, WANG Falin. Nonlinearity finite element analysis of rubber cylinder ring around the grout injector with mechanical sealing[J]. COAL GEOLOGY & EXPLORATION, 2014, 42(5): 96-99. DOI: 10.3969/j.issn.1001-1986.2014.05.019
Authors:FAN Chengzhou  HUANG Huayuan  LIU Zhenxing  DING Bocheng  WANG Falin
Affiliation:1.Northwest Institute of Nuclear Technology, Xi'an 710065, China
Abstract:Rubber cylinder is the key part of the grout injector with mechanical sealing. Its deformation process in borehole has multiple nonlinear characteristics. Analysis by the finite element software showed that along with the increase of axial displacement in borehole, the rubber cylinder was firstly contacted with hole wall, then the inner tube, finally extrusion deformation may occur. For sealing the borehole effectively and ensuring the resilience of the rubber cylinder, the compression displacement should be controlled between 17.8mm~19.4mm. Application shows that it achieved a good blocking effect by controlling the compression of the rubber cylinder under this range, and effectively extended the life of the rubber to improve the reliability of grouting. 
Keywords:grout injector  rubber cylinder  nonlinearity  finite element
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《煤田地质与勘探》浏览原始摘要信息
点击此处可从《煤田地质与勘探》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号