Original structures,and fragmentation and reassembly histories of asteroids: Evidence from meteorites

If chondritic meteorites were internally heated after accretion had ended, then the hottest material would have been buried the deepest and should have cooled the slowest. If this is correct, there ought to be a correlation between cooling rate and petrographic type, a measure of the extent to which chondrites were metamorphosed (i.e., heated). Published and new cooling rates derived from the compositions of metallic iron-nickel grains do not display this correlation, implying either that chondrite parent asteroids never had onion-shell structures or that bodies with onion-shell structures were broken up and reassembled prior to cooling to below 500°C, the temperature at which cooling-rate information is recorded in metallic iron-nickel. Chondritic regolith breccias formed from materials that resided on the surfaces of their parent asteroids. Metallic iron-nickel grains in H- and L-chondrite regolith breccias indicate that the breccia constituents cooled at rates ranging from 1 to > 1000°K/myr. Based on thermal calculations, these cooling rates suggest that the materials spread out on the surfaces of H- and L-chondrite parent asteroids originated at depths ranging from about one kilometer to several tens of kilometers. Craters deep enough to excavate tens of kilometers cannot form on typical asteroidal bodies only 100 to 300 km in diameter without disrupting them. Therefore, it appears that at least some asteroids, namely, the parent bodies of H and L chondrites, were disrupted after cooling to below 300°C, and then reassembled to create surfaces containing rocks that originated at a wide range of depths. These results support theoretical calculations suggesting that many asteroids were broken up and subsequently reassembled into gravitationally bound rubble piles.