Saturn's rings: Particle size distributions for thin layer models

The small physical thickness of Saturn's rings requires that radio occultation observations be interpreted using scattering models with limited amounts of multiple scatter. A new model in which the possible order of near-forward scatter is strictly limited allows for the small physical thickness, and can be used to relate Voyager 1 observations of 3.6-and 13-cm wavelength microwave scatter from Saturn's rings to the ring particle size distribution function n(a), for particles with radius 0.001 ≤ a ≤ 20 m. This limited-scatter model yields solutions for particle size distribution functions for eight regions in Saturn's rings, which exhibit approximately inverse-cubic power-law behavior, with large-size cutoffs in particle radius ranging from about 5 m in ring C to about 10 m in parts of ring A. The power-law index is about 3.1 in ring C, about 2.8 in the Cassini division, and increases systematically with radial location in ring A from 2.7 at 2.10R_s to slightly more than 3.0 at 2.24R_s. Corresponding mass densities are 32–43 kg/m² in ring C, 188 kg/m² in the Cassini division, and 244–344 kg/m² in ring A, under the assumption that the material density of the particles is 0.9 g/cm³. These values are a factor of 1 to 2 lower than first-order mass loading estimates derived from resonance phenomena. In view of the uncertainties in the measurements and in the linear density wave model, and the strong arguments for icy particles with specific gravity not greater than about 1, we interpret this discrepancy as being indicative of possible differences in the regions studied, or systematic errors in the interpretation of the scattering results, the density wave phenomena, or some combination of the above.