Properties and performance of a high volume fly ash grout |
| |
Authors: | Ayşe Pekrioglu Balkis |
| |
Institution: | 1. Department of Civil Engineering, Cyprus International University, Nicosia, Turkish Republic of Northern Cyprusapekrioglu@ciu.edu.tr |
| |
Abstract: | AbstractThis study investigated the penetrability of high volume fly ash cement suspensions prepared with and without superplasticizer into sandy soil having different relative densities with 30%, 60%, 73%, and 83% through permeation grouting. Class C fly ash was used due to its pozzolanic activity and fineness. Due to engineering characteristics and cost, cementitious grouts are the most commonly used grout in both waterproofing and ground strengthening. Fly ash-cement grouts have relatively constant and low viscosity values for a reasonable period after preparation, exhibit limited or negligible bleed capacity and set and develop satisfactory strength within a relatively short period. Modeling of grouting of soil was done in laboratory and improvements in physical and mechanical properties of grouted soil were analyzed. Unconfined compressive strength, shear strength and permeability characteristics of grouted soil were studied as a result. Unconfined compressive strength values of grouted sand with high volume fly ash ranged between 410 and 1107?kPa. Morover, cohesion values were comparable to microfine cement grouting ranging from 373 to 511?kPa. Furthermore, permeability values were also approximately equal to the permeability of impervious liners, which is around 1?×?10?7?cm/s. The findings support the applicability of grouting in different applications. |
| |
Keywords: | High volume fly ash permeation grouting rheology unconfined compressive strength shear strength permeability |
|
|