消除滑动扫描地震数据中谐波干扰的反相关方法(英文)

滑动扫描技术是高效、高保真、环保的可控震源勘探技术之一,是下一组震源不必等待上一组震源震动结束即可开始震动的高效采集方法。该技术由于缩短了相邻两炮的等待时间,使得生产效率得到显著提高。但是后一炮的谐波畸变与前一炮的基波信号混叠在一起,不易分离,在相关后的地震记录上形成了严重的谐波干扰,降低了地震资料的质量。本文提出一种反相关方法来压制滑动扫描地震数据中的谐波干扰。该方法首先把地面力信号分解为基波和各阶谐波分量;然后将后一炮的相关前数据分别与各分量相关,只选取正时间轴中对应分量的自相关部分,利用各分量的反相关算子提取各阶谐波信息;最后从前一炮数据中减去提取出的高阶谐波,得到压制谐波后的地震记录。该方法对有效信号影响小,可同时处理相关前和相关后数据,而且算法简单稳定,计算效率高。本文分别对理论模型和实际数据进行处理,验证了该方法消除谐波干扰的有效性。

The anti-correlation method for removing harmonic distortion in vibroseis slip-sweep data

The slip-sweep technique is one of the high-efficiency, high-fidelity, and environmental vibroseis seismic prospecting techniques which consists of a vibrator group sweeping without waiting for the previous group’s sweep to terminate. The cycle time can be reduced drastically and hence the production efficiency can be increased significantly but harmonic distortion of one sweep will leak into the record of the other sweep. In this paper, we propose an anti-correlation method for removing harmonic distortion in vibroseis data. This method is based on decomposition of the ground force signal into fundamental and harmonic components. Then the corresponding anti-correlation operator can be computed to estimate the energy of each harmonic after correlating the vibroseis data with the corresponding harmonic component. Finally, the vibroseis harmonic noise to be removed can be obtained by subtracting the extracted harmonic noise from the traces of the previous group’s sweep. The advantage of the proposed method is that it can process both uncorrelated and correlated vibroseis seismic data. Moreover, the algorithm is simple, stable, and computationally fast. Especially, the significant contribution of this method is a considerable reduction in the harmonic without any alteration of the desired signals. The method was tested on both synthetic and field data sets to validate the good harmonic noise suppression results.