Numerical simulation of three‐dimensional flow hydraulics in a braided channel

Results are presented from a numerical simulation of three‐dimensional flow hydraulics around a mid‐channel bar carried out using the FLUENT/UNS computational fluid dynamics (CFD) software package. FLUENT/UNS solves the three‐dimensional Reynolds‐averaged form of the Navier–Stokes equations. Turbulence closure is achieved using a RNG k–ϵ model. Simulated flow velocities are compared with measured two‐dimensional velocities (downstream and cross‐stream) obtained using an electromagnetic current meter (ECM). The results of the simulation are qualitatively consistent with the flow structures observed in the field. Quantitative comparison of the simulated and measured velocity magnitudes indicates a strong positive correlation between the two (r=0·88) and a mean difference of 0·09 m s⁻¹. Deviations between simulated and measured velocities may be identified that are both random and systematic. The former may reflect a number of factors including subgrid‐scale natural spatial variability in flow velocities associated with local bed structures and measurement uncertainty resulting from problems of ECM orientation. Model mesh configuration, roughness parameterization and inlet boundary condition uncertainty may each contribute to systematic differences between simulated and measured flow velocities. These results illustrate the potential for using CFD software to simulate flow hydraulics in natural channels with complex configurations. They also highlight the need for detailed spatially distributed datasets of three‐dimensional flow variables to establish the accuracy and applicability of CFD software. Copyright © 1999 John Wiley & Sons, Ltd.