| Abstract: | Rainfall was simulated on unconfined plots on regolith in debris flow source areas using a portable simulator. In total, 351 simulations were carried out on steep slopes (27–54°) with rainfall intensities of 28–291 mm/h. From these rainfall simulations the infiltration parameters sorptivity (S) and steady-state infiltration capacity (K) of the regolith, and a threshold for the occurrence of micro-scale mass movements, were obtained. Two evaluation methods were used to obtain the infiltration parameters K and S. The ‘infiltration envelope’ method uses rainfall intensity and time to ponding from multiple tests and fits an infiltration envelope through the data from which K and S can be obtained. The ‘constant runoff’ method uses rainfall intensity and overland flow intensity to calculate K, after which S can be calculated in several ways by using time to ponding. The constant runoff method produced K values of 16.6–128 mm/h, which usually show a log-normal distribution. K values depend on the regolith parent material and rainfall intensity. Using this method, S values are 0.088–0.381 cm/min1/2. The infiltration envelope method produced K values of 9.8–131 mm/h and S values of 0.14–0.32 cm/min1/2. It can be argued that both methods overestimate K as well as S, but quantitative relations between measured/calculated and actual values of K and S have not yet been obtained. At high rainfall intensities, typically 100 mm/h or more, micro-scale mass movements sometimes occur. A lower threshold curve for the occurrence of these micro-scale mass movements has been constructed. It is a function of both slope angle and rainfall intensity. The micro-scale mass movements could play an important part in the initiation of debris flows in the study area, possibly by delivering sediment to overland flow. On the very steep slopes, the sediment-rich overland flow can easily mobilize coarse material. |
