Formation of beach cusps in a wave tank

Beach cusps with a longshore spacing of 20 to 150 cm have been built by the continuous action of incident waves on a steep laboratory beach floor covered uniformly with a thin bed of glass beads. Breaking of incident waves was observed to induce vortices on the bed by interacting with swash motion along the beach face. Beach cusps formed when the value of a dimensionless parameter H_b/sgT_i² became smaller than 0.042; H_b is the breaking height of the incident waves, T_i their period, s the beach slope and g the acceleration due to gravity. This critical value occurred at a nearly central part of the generation region 0.003 < H_b/sgT_i² < 0.068 for plunging breakers presented by Galvin (1968). Breaking-wave-induced vortices rather than breaker types controlled the movement of bed material in the nearshore zone. Most of the measured spacings of beach cusps, including previous observations, were in good agreement with half a wavelength of the zero-mode subharmonic edge wave, which is generated on the beach by the refraction of incident waves and has twice the period of the waves. The role of edge waves at each stage of cusp formation still remains as an important problem to be clarified.