不同径厚比的海底管道压溃屈曲研究 |
| |
引用本文: | 冯浩,马超,王有发,刘天. 不同径厚比的海底管道压溃屈曲研究[J]. 海洋技术学报, 2023, 0(4): 76-82 |
| |
作者姓名: | 冯浩 马超 王有发 刘天 |
| |
作者单位: | 1. 中国石油天然气管道工程有限公司;2. 中国石油集团海洋工程重点实验室;3. 国家管网建设项目管理分公司 |
| |
基金项目: | 中国石油天然气集团有限公司科学研究与技术开发项目(2019B-3010) |
| |
摘 要: | 为了探索不同径厚比海底管道的压溃屈曲特性,本文分别采用挪威船级社(Det Norske Veritas,DNV)规范、有限元模拟和深海压力舱模型试验,研究不同径厚比海底管道承载外部水压的能力,并就DNV规范压溃屈曲计算公式对不同径厚比管道的适用性进行了讨论,优化了小径厚比海底管道压溃屈曲的设计方法。研究表明:小径厚比管道的压溃屈曲临界压力对管道径厚比的变化更敏感;DNV规范计算小径厚比管道的压溃屈曲临界压力偏小,在进行深海管道的压溃屈曲设计时,建议采用模型试验结合有限元模拟的方法,计算管道实际可提供的压溃屈曲承载力。
|
关 键 词: | 深水管道 压溃屈曲 径厚比 有限元模拟 模型试验 |
Study on Collapse Buckling of Diverse Diameter-Thickness Ratio Subsea Pipeline |
| |
Abstract: | In order to study the collapse buckling characteristics of diverse diameter-thickness ratio subsea pipelines, DNV code, finite element simulation and large-scale pressure chamber model test were used to calculate the external pressure bearing capacity of subsea pipelines with different diameter-thickness ratios. The applicability of DNV collapse buckling calculation method to diverse diameterthickness ratio pipelines was discussed. And the collapse buckling design method of big diameter-thickness ratio subsea pipeline was optimized. The results show that the critical collapse buckling pressure of big diameter-thickness ratio pipeline is more sensitive to the change of diameter-thickness ratio. The critical collapse buckling pressure of big diameter-thickness ratio pipeline calculated by DNV is too small. When carrying out the collapse buckling design of deep-water pipeline, it is recommended to do model test combined with finite element simulation to calculate the collapse buckling bearing capacity. |
| |
Keywords: | deep water pipeline collapse buckling diameter-thickness ratio finite element simulation model test |
|
| 点击此处可从《海洋技术学报》浏览原始摘要信息 |
|
点击此处可从《海洋技术学报》下载免费的PDF全文 |