Hydrodynamic characteristics of the Tam Pokhari glacial lake outburst flood in the Mt. Everest region,Nepal

The Tam Pokhari glacial lake outburst flood (GLOF), which occurred in 1998 in the Mt. Everest region of Nepal, was evaluated using hydrodynamic models to gain a better understanding of the flow behaviour. The flood wave was analysed separately under rigid and erodible boundary conditions. In both cases, the calculated dam‐breach hydrograph, which had a peak discharge of about 10 000 m³/s, was routed through the Inkhu River, which originates from the lake. The morphologic changes along the river were also analysed and the results were compared with satellite images, field observations and recorded data. In the case of rigid boundaries, the routing procedure gradually attenuated the peaks of the hydrographs to account for hydraulic pooling in narrow gorges and storage in the channel. In the case of erodible boundaries, such effects were minimized due to the increment in channel capacity associated with erosion by debris flow. The study revealed that the GLOF event produced a large‐scale debris flow. Additionally, the results revealed that erosion and deposition took place intermittently, but that approximately 440 000 m³ of sediment was deposited about 14 km downstream from the lake mouth. The calculated peak of the water and sediment mixture at 14·4 km was found to be 30 000 m³/s, which is almost 6 times as large as that observed when the rigid boundary conditions were used. Further, the increase in the peaks of the hydrographs due to sediment transport was the primary reason for the destruction associated with the GLOF. These findings suggest that the local sedimentology and topography, as well as other geo‐hazard conditions in the area, should be carefully evaluated before recommending any control measures against GLOFs in the Himalayan region. Copyright © 2009 John Wiley & Sons, Ltd.