A case study on the behaviour of a deep excavation in sand

A complete case record of an excavation in sand is explored in this study. Numerical analyses were conducted to evaluate the influences of soil elasticity, creep and soil–wall interface. Back-analyses indicate small strain parameters should be used if an elastic–perfect plastic model is selected. In addition, excavation-induced seepage has only a limited effect on vertical displacements. Delayed installation of 3rd level struts and base slab construction caused significant time-dependent (creep) movements during the excavation. Back-analyses show that the dynamic viscosity (D_v) used in the visco-elastic model for creep simulation is in the range of 1.5 × 10¹⁵–2.0 × 10¹⁵ Pa, but there are still inconsistencies in movements both near to and far from the excavation. Interpreting from observation data, the creep rate of wall movement caused in the non-supported stage of the excavation varies between 0.14 and 0.38 mm/day. Finally, parametric studies of interface elements indicate that the most sensitive parameters are the normal (K_n) and shear stiffness (K_s) of the interface. Back-analyses using an elastic–perfect plastic model indicate that using 3 × 10⁶ Pa for K_n and K_s produces more acceptable results.