Treatment of arsenic rich waters by the HDS process

Arsenic contaminated waters are not uncommon; indeed from naturally occurring contaminated waters through to those that are a direct consequence of human activities such as mining, all are affecting the quality of water resources worldwide. The ever increasing demands on natural water resources mean that the effective control of this toxic contaminant is paramount and this is reflected in the ever increasing global legislation.There are currently three mechanisms by which arsenic is commercially treated in effluents. These are physical separation processes such as reverse osmosis, precipitation/adsorption processes, some of which are bacterially assisted, and a whole variety of ion exchange processes, again with some bacterial enhancement. The choice of treatment is not only driven by cost but by the chemistry of the water and the water quality standard to be met.In this study a very high arsenic enriched groundwater, containing in excess of 25,000 µg/L arsenic, was treated by a typical treatment method through a continuously operated pilot plant. In the treatment, iron III salts were added to the influent in order to form precipitates with the arsenic and to form an adsorptive surface that would assist with treatment of the enriched water. This addition of iron III salts for the removal of arsenic is common practice in the water treatment industry as the resulting iron III arsenates are highly stable.However, results from the pilot plant show that the process was further enhanced by the addition of small amounts of hydrogen peroxide. Hydrogen peroxide is a powerful oxidising reagent and assists in ensuring the complete conversion of any arsenic III to arsenic V that was then effectively removed in the pilot plant. After treatment residual arsenic levels of 10 µg/L were obtained compared to 68 µg/L without oxidation reagent addition.