Corrosion-induced gas generation in a nuclear waste repository: Reactive geochemistry and multiphase flow effects

Corrosion of steel canisters, stored in a repository for spent fuel and high-level nuclear wastes, leads to the generation and accumulation of H₂ gas in the backfilled emplacement tunnels, which may significantly affect long-term repository safety. Previous studies have used H₂ generation rates based on the volume of the waste or canister material and the stoichiometry of the corrosion reaction. However, Fe corrosion and H₂ generation rates vary with time, depending on factors such as amount of Fe, water availability, water contact area and aqueous and solid chemistry. To account for these factors and feedback mechanisms, a chemistry model was developed related to Fe corrosion, coupled with two-phase (liquid and gas) flow phenomena that are driven by gas-pressure buildup associated with H₂ generation and water consumption. Results indicate that by dynamically calculating H₂ generation rates based on a simple model of corrosion chemistry, and by coupling this corrosion reaction with two-phase flow processes, the degree and extent of gas-pressure buildup could be much smaller compared to a model that neglects the coupling between flow and reactive transport mechanisms. By considering the feedback of corrosion chemistry, the gas pressure increases initially at the canister, but later decreases and eventually returns to a stabilized pressure that is slightly higher than the background pressure. The current study focuses on corrosion under anaerobic conditions for which the coupled hydrogeochemical model was used to examine the role of selected physical parameters on H₂ gas generation and corresponding pressure buildup in a nuclear waste repository. The developed model can be applied to evaluate the effect of water and mineral chemistry of the buffer and host rock on the corrosion reaction for future site-specific studies.