| Abstract: | A new method for designing moment resisting steel frames failing in a global mode is presented in this paper. Starting from the analysis of the typical collapse mechanisms of frames subjected to horizontal forces, the method is based on the application of the kinematic theorem of plastic collapse. The beam section properties are assumed to be known quantities, because they are designed to resist vertical loads. As a consequence, the unknowns of the design problem are the column sections. They are determined by means of design conditions expressing that the kinematically admissible multiplier of the horizontal forces corresponding to the global mechanism has to be the smallest among all kinematically admissible multipliers. In addition, the proposed design method includes both the influence of distributed loads acting on the beams and the influence of second-order effects. In particular, the influence of second-order effects, which can play an important role in the seismic design of steel frames, is accounted for by the mechanism equilibrium curves of the analysed collapse mechanisms. Moreover, in order to show the practical application of the proposed design procedure, a worked example is presented. Finally, the inelastic behaviour of the designed frame is compared to that obtained when the simple member hierarchy criterion or a similar rule is applied. © 1997 by John Wiley & Sons, Ltd. |
