Very low temperature,natural deformation of fine grained limestone: a case study from the Lucania region,southern Apennines,Italy

The deformation behavior of fine grained limestones from the Monte Sirino area (Lucania region) of the southern Apennines has been analysed by constraining microstructural observations and crystallographic fabrics with data on the metamorphic conditions of deformation. X-ray and infrared analysis of clay minerals, together with illite ‘crystallinity’ data, suggest that the studied rocks underwent very low grade metamorphism in the deep diagenetic zone. The limestones consist of very fine grained (<10 μm) aggregates of micrite. Elliptically-shaped radiolarians, preserved as moulds with coarser (>20 μm) crystalline fillings, provide common strain markers. Optical microstructures and strain analysis indicate heterogeneous intracrystalline strain in the coarser (>50 μm) calcite. On the other hand, SEM and TEM observations, and crystallographic fabrics determined by X-ray texture goniometry, indicate a deformation involving not only intracrystalline slip, but also an important component of grain boundary sliding in the fine grained matrix. The inferred microscopic deformation mechanisms are compared with constitutive flow laws derived from experimental studies. For the maximum inferred temperature of deformation of 250 °C and geologic strain rates of 10^–13–10^–15 s^–1, deformation mechanism maps for calcite suggest twinning and other glide mechanisms to be active in grains larger than about 5–10 μm. Smaller grains would be mostly deformed by grain size sensitive creep mechanisms, which include both diffusion mass transfer processes and grain boundary sliding. Deformation features observed in the study limestones are compatible with the prediction of such temperature-dependent mechanism maps.