Mg2+ removal in the system Mg2+—amorphous SiO2—H2O by adsorption and Mg-hydroxysilicate precipitation

Two chemical processes can remove Mg²⁺ from suspensions containing amorphous silica (am-SiO₂) at low temperatures: adsorption and precipitation of a Mg-hydroxysilicate resembling sepiolite. Mg²⁺ removal from am-SiO₂ suspensions was investigated, and the relative role of the two removal processes evaluated, as a function of: pH, ionic strength, Mg²⁺ concentration, and temperature.The extent of Mg²⁺ adsorption onto am-SiO₂ decreases with increasing NaCl concentration due to displacement of Mg²⁺ by Na⁺. At NaCl concentrations of 0.05 M and above, adsorption occurs only at pH values above 8.5, where rapid dissolution of am-SiO₂ gives rise to high concentrations of dissolved silica, resulting in supersaturation with respect to sepiolite. Removal of Mg²⁺, at concentrations of 40 to 650 μM, from am-SiO₂ suspensions in 0.70 M NaCl at 25 °C occurs at pH 9.0 and above. Experiments show that under these conditions adsorption and Mg-hydroxysilicate precipitation remove Mg²⁺ at similar rates. For 0.05 M Mg²⁺, at 0.70 M ionic strength and 25 °C, measurable Mg²⁺ removal occurs down to ca. pH 7.5 but is primarily due to Mg-hydroxysilicate precipitation. For the same solution conditions at 5°C, Mg²⁺ removal occurs above pH 8.0 and is primarily due to adsorption.Assuming that increasing pressure does not greatly enhance adsorption, Mg²⁺ adsorption onto am-SiO₂ is an insignificant process in sea water. The surface charge of pristine am-SiO₂ in sea water is primarily controlled by interactions with Na⁺. The principal reaction between Mg²⁺ and am-SiO₂ in marine sediments is sepiolite precipitation.The age distribution of sepiolite in siliceous pelagic sediments is influenced by temperatures of bottom waters and by geothermal gradients.