Selective Preconcentration of Trace Amounts of Cu(II) With Surface‐Imprinted Multiwalled Carbon Nanotubes |
| |
Authors: | Kübra Turan Rukiye Saygili Canlıdinç Orhan Murat Kalfa |
| |
Affiliation: | Science and Art Faculty, Department of Chemistry, Dumlup?nar University, Kütahya 43100, Turkey |
| |
Abstract: | In this study, a new sorbent is synthesized using surface imprinting technique. Cu(II)‐imprinted multiwalled carbon nanotube sorbent (Cu(II)‐IMWCNT) is used as the solid phase in the solid‐phase extraction method. After the preconcentration procedure, Cu(II) ions are determined by high‐resolution continuum source atomic absorption spectrometry. A total of 0.1 mol L?1 ethylenediaminetetraacetic acid (EDTA) is used to remove Cu(II) ions from the sorbent surface. The optimum experimental conditions for effective preconcentration of Cu(II), parameters such as pH, eluent type and concentration, flow rate, sample volume, sorbent capacity, and selectivity are investigated. The synthesized solid phase is characterized by Fourier transform infrared spectroscopy and scanning electron microscopy. The maximum adsorption capacities of Cu(II)‐IMWCNT and non‐imprinted solid phases are 270.3 and 14.3 mg g?1 at pH 5, respectively. Under optimum experimental conditions for Cu(II) ions, the limit of detection is 0.07 μg L?1 and preconcentration factor is 40. In addition, it is determined to be reusable without significant decrease in recovery values up to 100 adsorption–desorption cycles. Cu(II)‐IMWCNT have a high stability. To check the accuracy of the developed method, certified reference materials, and water samples are analyzed with satisfactory analytical results. |
| |
Keywords: | carbon nanotubes high‐resolution continuum source atomic absorption spectrometry preconcentration surface‐ion imprinting technique trace metals |
|
|