| 基于测量笔的模具刻线测量 |
| |
| 引用本文： | 王永强,冯其强,李宗春,程志强. 基于测量笔的模具刻线测量[J]. 测绘科学技术学报, 2017, 34(3). DOI: 10.3969/j.issn.1673-6338.2017.03.014 |
| |
| 作者姓名： | 王永强 冯其强 李宗春 程志强 |
| |
| 作者单位： | 1. 信息工程大学,河南郑州,450001;2. 北京吉威时代软件技术有限公司,北京,100043 |
| |
| 基金项目： | 航天器联合测量实验室基金项目 |
| |
| 摘 要： | 针对模具工业对于模具刻线检测的迫切需求,首次将测量笔式单相机位姿测量系统引入模具刻线测量。基于单片空间后方交会原理建立测量笔坐标系与世界坐标系的关系,通过公共点转换求解刻线上测量点的三维坐标;再将所有测量点与CAD模型进行比对,得到刻线精度(均方根值)。实际工程应用表明该系统摄站灵活方便,测量精度高,在3 m范围内测得刻线精度优于0.5 mm,完全可以满足大尺寸测量中的刻线检测精度要求。
|
| 关 键 词： | 测量笔 空间后方交会 坐标转换 刻线测量 模型比对 |
Mould Scribed Line Measurement Based on Measuring Pen |
| |
| WANG Yongqiang,FENG Qiqiang,LI Zongchun,CHENG Zhiqiang. Mould Scribed Line Measurement Based on Measuring Pen[J]. Journal of Zhengzhou Institute of Surveying and Mapping, 2017, 34(3). DOI: 10.3969/j.issn.1673-6338.2017.03.014 |
| |
| Authors: | WANG Yongqiang FENG Qiqiang LI Zongchun CHENG Zhiqiang |
| |
| Abstract: | For the urgent demand for mould scribed line detection in the mould industry,single-camera position and orientation measurement system based on measuring pen is used in scribed line detection.Based on the principle of single space resection,the relationship between the measuring pen coordinate system and the world coordinate system is established.The coordinates of the tip of the measuring pen which touches the scribed line are calculated using three-dimensional coordinate transformation.The detection precision is obtained comparing all measurement points with CAD model.The method is flexible and convenient,and has high measuring precision.Practical engineering results demonstrate that the mean square deviation is less than 0.5 mm in the range of 3 m,which can completely satisfy the demand for the scribed line detection in large size measurement. |
| |
| Keywords: | measuring pen space resection coordinate transformation scribed line detection model comparison |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
