The effect of alkalis and polymerization on the solubility of H2O and CO2 in alkali-rich silicate melts

The effect of alkalis on the solubility of H₂O and CO₂ in alkali-rich silicate melts was investigated at 500 MPa and 1,250 °C in the systems with H₂O/(H₂O + CO₂) ratio varying from 0 to 1. Using a synthetic analog of phonotephritic magma from Alban Hills (AH1) as a base composition, the Na/(Na + K) ratio was varied from 0.28 (AH1) to 0.60 (AH2) and 0.85 (AH3) at roughly constant total alkali content. The obtained results were compared with the data for shoshonitic and latitic melts having similar total alkali content but different structural characteristics, e.g., NBO/T parameter (the ratio of non-bridging oxygens over tetrahedrally coordinated cations), as those of the AH compositions. Little variation was observed in H₂O solubility (melt equilibrated with pure H₂O fluid) for the whole compositional range in this study with values ranging between 9.7 and 10.2 wt. As previously shown, the maximum CO₂ content in melts equilibrated with CO₂-rich fluids increases strongly with the NBO/T from 0.29 wt % for latite (NBO/T = 0.17) to 0.45 wt % for shoshonite (NBO/T = 0.38) to 0.90 wt % for AH2 (NBO/T = 0.55). The highest CO₂ contents determined for AH3 and AH1 are 1.18 ± 0.05 wt % and 0.86 ± 0.12 wt %, respectively, indicating that Na is promoting carbonate incorporation stronger than potassium. At near constant NBO/T, CO₂ solubility increases from 0.86 ± 0.12 wt % in AH1 [Na/(Na + K)] = 0.28, to 1.18 ± 0.05 wt % in AH3 [Na/(Na + K)] = 0.85, suggesting that Na favors CO₂ solubility on an equimolar basis. An empirical equation is proposed to predict the maximum CO₂ solubility at 500 MPa and 1,100–1,300 °C in various silicate melts as a function of the NBO/T, (Na + K)/∑cations and Na/(Na + K) parameters: ({text{wt}}% ;{text{CO}}_{2} = - 0.246 + 0.014exp left( {6.995 cdot frac{text{NBO}}{T}} right) + 3.150 cdot frac{{{text{Na}} + {text{K}}}}{{varSigma {text{cations}}}} + 0.222 cdot frac{text{Na}}{{{text{Na}} + {text{K}}}}.) This model is valid for melt compositions with NBO/T between 0.0 and 0.6, (Na + K)/∑cation between 0.08 and 0.36 and Na/(Na + K) ratio from 0.25 to 0.95 at oxygen fugacities around the quartz–fayalite–magnetite buffer and above.