Analysis and application of a non-conventional underwater geoelectrical method in Lake Geneva,Switzerland

The electrical method presented is used for determining the resistivity of lake-bottom sediments and is based on the d.c. electrical sounding principles. The electrode array, called the fishing rod (FR), is of pole-pole type and is orientated vertically on a line perpendicular to the surface of the water. The technique is used for mapping resistivity anomalies located deep underwater. This paper presents an analysis of the resolution capabilities of the FR method and the results of a case study carried out in Lake Geneva, where measurements were interpreted using a one-dimensional (1D) multilayer earth model. The analysis of the uncertainty in the model parameters of a 1D multilayer earth model is carried out using the covariance matrix of the linearized inversion problem. The results of the analyses show that when the thickness and resistivity of the water layer is known, the resistivity of the sediment layer is well determined under most circumstances. The thickness of the sediment layer is well determined when resistivity contrasts are not too low. In Lake Geneva the FR method has been used to study an old depression with a resistive channel. This application shows the efficiency of the method compared with conventional electrical methods, where water depth becomes a limiting factor. The use of an automated iterative inversion scheme in this particular case is advantageous, as a joint interpretation of the three different data sets measured with the FR method can be carried out. Finally, the result of the inversion is compared with the trial-and-error interpretations of a previous study.