Factors Affecting Crack Initiation in Low Porosity Crystalline Rocks

Crack initiation in uniaxial compressive loading of rocks occurs well before the peak strength is reached. The factors that may influence the onset of cracking and possible initiating mechanisms were explored using a discrete element numerical approach. The numerical approach was based on grain-based model that utilized the Voronoi tessellation scheme to represent low porosity crystalline rocks such as granite. The effect of grain size distribution (sorting coefficient ranging from 1.5 to 1.03), grain size (average grain size ranging from 0.75 to 2.25 mm), and the heterogeneities of different mineral grains (quartz, K-feldspar, plagioclase) on the onset of cracking were examined. The modelling revealed that crack initiation appears to be a tensile mechanism in low porosity rocks, and that shear cracking along grain boundaries is only a prominent mechanism near the peak strength. It was also shown that the heterogeneity introduced by the grain size distribution had the most significant effect on peak strength and crack initiation stress. The peak strength ranges from 140 to 208 MPa as the grain size distribution varies from heterogeneous to uniform, respectively. However, the ratio of crack initiation to peak stress showed only minor variation, as the heterogeneity decreases. The other factors investigated had only minor effects on crack initiation and peak strength, and crack initiation ratio.