Hydromechanical properties and alteration of natural fracture surfaces in the Soultz granite (Bas-Rhin, France)

Natural fractures are characterized by rough surfaces and complex fluid flows. A large distribution of apertures (residual voids) within their walls and the presence of contact points (in situ normal loads) produce heterogeneous flows (channeling). The resulting permeabilities, porosities or fluid–rock exchange surfaces cannot be realistically modeled by parallel and smooth plate models. Four natural fractures are sampled at different depths and degrees of alteration in the Soultz sandstone and granite (EPS1 drillhole, Soultz-sous-Forêts, Bas-Rhin, France). The fracture surfaces are measured with mechanical profilometry and maps of asperity heights (XYZ). Resulting local apertures (XYe) are then calculated. A statistical study of the surface profiles (XZ) show that the fractures are more or less rough and tortuous according to the types of alteration. Altered samples are characterized by smoother surfaces of fractures. Such differences imply that (i) the average fracture aperture is not representative for the whole fracture and that (ii) the different local apertures should be integrated in hydraulic and mechanical models. A hydraulic model (finite difference calculations) of fluid flow, taking into account the elastic closure (Hertz contact theory) of fractures with depth, is used. Maps of contact points and relative local loads within the fracture planes are compared to flow maps. They show different channeling of fluid flows. Strongly altered fractures are characterized by homogeneous fluxes despite the presence of numerous contact zones during the closure of fracture. By contrast, fresh fractures develop, increasing fluid flow channels with depth.Fracture closure (increasing normal stress) does not systematically increase the channeling of fluid flow. There is evidence for a general smoothing out of the irregularities of the fracture walls due to precipitation of secondary minerals, indicating that the cubic law can be commonly valid, also at great crustal depth but this validity depends on the degree of fracture alteration. Mineralogical and geochemical observations, thus, should be taken into account to perform more accurate permeability calculations and models of fluid circulation in fracture networks.