首页 | 本学科首页   官方微博 | 高级检索  
     

现浇混凝土-冻土接触面冻结强度直剪试验研究
引用本文:吉延峻,贾昆,俞祁浩,金会军,郭磊,罗晓晓. 现浇混凝土-冻土接触面冻结强度直剪试验研究[J]. 冰川冻土, 2017, 39(1): 86-91. DOI: 10.7522/j.issn.1000-0240.2017.0011
作者姓名:吉延峻  贾昆  俞祁浩  金会军  郭磊  罗晓晓
作者单位:1. 中国科学院 西北生态环境资源研究院 冻土工程国家重点实验室, 甘肃 兰州 730000;2. 中国能源建设集团 甘肃省电力设计院有限公司, 甘肃 兰州 730050;3. 中国科学院大学, 北京 100049;4. 国家电网 青海省电力公司, 青海 西宁 810008
基金项目:国家自然科学基金项目,国家科技支撑计划项目,中国科学院寒区旱区环境与工程研究所STS项目
摘    要:关于混凝土-冻土接触面的力学强度研究多集中于预制成型混凝土样(块)与冻土接触面的力学试验研究,而与工程实际更为接近的冻土中现浇混凝土、冻结稳定后混凝土-冻土接触面的力学强度研究则少有涉及。基于冻土中现浇混凝土的试验方式,开展了不同水灰比、含冰量及冻土温度条件下,混凝土-冻土复杂接触面冻结强度的直剪试验研究。结果表明:试验条件下,由于混凝土中粗、细骨料导热系数及水化热侵蚀强度不同,冻土中现浇混凝土会导致混凝土-冻土接触面发生起伏变化。受该因素影响,粗糙接触面较光滑接触面的冻结强度增大71.9%。粗糙接触面引起的应力集中,使得剪应力在剪切破坏过程中出现间歇性增大、跳跃。在冻结强度构成中,随接触面粗糙程度的增大, φ值对冻结强度增长的贡献要大于c值。水灰比由0.4增至0.6,混凝土导热系数降低,生成接触面趋于光滑,冻结强度减小;土体含水量由15%增大至30%时,冻结强度增大,含水量继续增大至40%时,冻结强度减小;在不同温度条件下,整体呈现冻土温度降低冻结强度相应增大的趋势。基于上述结果,多年冻土区灌注桩设计时,建议混凝土采用0.4~0.5水灰比。

关 键 词:现浇混凝土  冻土  直剪试验  接触面  冻结强度  剪应力  
收稿时间:2016-09-10
修稿时间:2016-12-18

Direct shear tests of freezing strength at the interface between cast-in-situ concrete and frozen soil
JI Yanjun,JIA Kun,YU Qihao,JIN Huijun,GUO Lei,LUO Xiaoxiao. Direct shear tests of freezing strength at the interface between cast-in-situ concrete and frozen soil[J]. Journal of Glaciology and Geocryology, 2017, 39(1): 86-91. DOI: 10.7522/j.issn.1000-0240.2017.0011
Authors:JI Yanjun  JIA Kun  YU Qihao  JIN Huijun  GUO Lei  LUO Xiaoxiao
Affiliation:1. State Key Laboratory of Frozen Soil Engineering, Northwest Institute of Eco-Environment and Resources, Chinese Academy of Sciences, Lanzhou 730000, China;2. Gansu Electric Power Design Institute Co., Ltd, Energy China, Lanzhou 730050, China;3. University of Chinese Academy of Sciences, Beijing 100049, China;4. Qinghai Electric Power Company, State Grid Corporation of China, Xining 810008, China
Abstract:Previous experimental study of interface strength between concrete pile and frozen soil has focused more on the mechanical properties of the interface between precast concrete block or specimen and frozen soil with less information about direct shear test of freezing strength between cast-in-situ concrete and frozen soil.Based on a new specimen preparation method,a series of laboratory direct shear tests of the interface between cast-in-situ and frozen soil were performed.The results show that because of difference in thermal parameters of concrete,the interface between cast-in-situ concrete and frozen soil appears irregular model.Freezing strength of rough interface will increase by 71.9% as compared with that of smooth interface.Stress concentration occurs on the rough interface,resulting in stress intermittently increasing and jumping in the shear failure process.With the increase of roughness at the interface,ψ contribution increase more than c contribution increase by degree.Thus ψ can play more important role in the growth of freezing strength.When water cement ratio increases from 0.4 to 0.6,with the thermal conductivity of concrete decreasing,the interface becomes smoother and the freezing strength will decrease;when water content increases from 15% to 30%,freezing strength will increase first and then decrease;when water content increases to 40%,freezing strength will decrease.Thus,it is recommendedthat 0.4 ~ 0.5 is a reasonable water cement ratio,according to this study.
Keywords:cast-in-situ concrete  frozen soil  direct shear test  interface  freezing strength  shear-stress
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《冰川冻土》浏览原始摘要信息
点击此处可从《冰川冻土》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号