| 钢纤维掺量对钢筋混凝土桥面板冲切性能影响 |
| |
| 引用本文： | 单东萌,杨秋宁,毛明杰,张尚荣. 钢纤维掺量对钢筋混凝土桥面板冲切性能影响[J]. 震灾防御技术, 2019, 14(3): 584-590. DOI: 10.11899/zzfy20190311 |
| |
| 作者姓名： | 单东萌 杨秋宁 毛明杰 张尚荣 |
| |
| 作者单位： | 宁夏大学, 土木与水利工程学院, 银川 750021 |
| |
| 基金项目： | 国家自然科学基金（51468052）,宁夏回族自治区科技支撑计划项目（2018BFH03002） |
| |
| 摘 要： | 通过对钢纤维体积率为0和0.38%的双向板试件进行冲切试验,得到试件的破坏形态、钢筋和混凝土荷载-应变规律等,进而量化评估钢纤维掺量对钢筋混凝土桥面板冲切性能的影响。结果表明:钢纤维体积率为0与0.38%的试件相比,相同荷载作用下后者的钢筋、混凝土应变较小;首条裂缝的出现时间推迟;试件在冲切破坏时挠度变形较大且板底表面混凝土脱落较少。
|
| 关 键 词： | 冲切强度 钢纤维 钢筋混凝土桥面板 破坏形式 |
| 收稿时间： | 2019-01-15 |
Effect of Steel Fiber Content on Punching Shear Performance of Reinforced Concrete Slab |
| |
| Shan Dongmen,Yang Qiuning,Mao Mingjie and Zhang Shangrong. Effect of Steel Fiber Content on Punching Shear Performance of Reinforced Concrete Slab[J]. Technology for Earthquake Disaster Prevention, 2019, 14(3): 584-590. DOI: 10.11899/zzfy20190311 |
| |
| Authors: | Shan Dongmen Yang Qiuning Mao Mingjie Zhang Shangrong |
| |
| Affiliation: | School of Civil and Hydraulic Engineering., Ningxia University, Yinchuan 750021, China |
| |
| Abstract: | In order to study the influence of steel fiber content on the punching performance of reinforced concrete slabs, we conducted the punching test of two-dimensional plate specimens with steel fiber volume fractions of 0 and 0.38%, and obtained the failure modes, the law of bars strains and concrete strains of the specimens. Then, we quantitatively evaluated the influence of steel fiber content on the punching performance of reinforced concrete slabs. The results show that comparing with the specimens with 0 and 0.38% steel fiber volume, the bars strains and concrete strains of the latter are less under the same load, and the first crack was delayed. The deflection of the specimen during punching failure is larger and less concrete on the bottom surface of the specimen shed. |
| |
| Keywords: | Punching strength Steel fiber Reinforced concrete slab Destructive form |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《震灾防御技术》浏览原始摘要信息 |
|
点击此处可从《震灾防御技术》下载全文 |
|
