| 高孔隙多金属硫化物海水围压下切削模拟 |
| |
| 引用本文： | 李艳,王梓勋,栗梦丹.高孔隙多金属硫化物海水围压下切削模拟[J].海洋工程,2018,36(5):83-89. |
| |
| 作者姓名： | 李艳 王梓勋 栗梦丹 |
| |
| 作者单位： | 中南大学机电工程学院;深海矿产资源开发利用技术国家重点实验室 |
| |
| 基金项目： | 国家自然科学基金项目（51674286）；国家重点研发计划项目（2016YFC0304101） |
| |
| 摘 要： | 考虑海底多金属硫化物(SMS)高孔隙率、受围压等特点,首先采用蒙特卡罗法,结合APDL语言建立了具有一定孔隙率的SMS矿体几何模型,然后基于LS-DYNA仿真平台建立了高海水围压条件下单截齿切削破碎具有一定孔隙率SMS矿体的仿真模型,并进行了相应的数值模拟。研究结果表明:在高海水围压条件下,多金属硫化物的切削难度明显增强,高围压作用使切屑更难从矿体基岩剥离,截齿受到的三向阻力明显增大;随着多金属硫化物矿体的孔隙率增大,截齿破碎矿体受到的切削阻力会减小。
|
| 关 键 词： | 海底多金属硫化物 高海水围压 孔隙率 矿体破碎 截割阻力 |
Numerical simulation of cutting porous massive sulfide under high confining pressure |
| |
| LI Yan,WANG Zixun and LI Mengdan.Numerical simulation of cutting porous massive sulfide under high confining pressure[J].Ocean Engineering,2018,36(5):83-89. |
| |
| Authors: | LI Yan WANG Zixun and LI Mengdan |
| |
| Abstract: | Seafloor Massive Sulfide has distinguished characteristics, which are high confining pressure and high porosity. Firstly, an ore body geometry model with certain porosity was built by using the Monte Carlo stochastic theory combined with language APDL. Then, a finite element simulation model for cutting SMS ore body with certain porosity by point-attack pick was developed. Cutting simulations under different confining pressures and with different porosities were carried. It is concluded that the failure strength and three components of cutting force of SMS increase significantly with the increase of confining pressure. The high confining pressure makes it more difficult for chips split from the ore body; and the cutting resistance on the pick decreases with the increase of ore body porosity. |
| |
| Keywords: | seafloor massive sulfide deepwater confining pressure porosity ore crushing cutting resistance |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《海洋工程》浏览原始摘要信息 |
| 点击此处可从《海洋工程》下载免费的PDF全文 |
