Modelling and modal analysis of seismic vibrator baseplate

The vibroseis method must be extended to its limits as the search for oil and gas continues on land. To successfully improve vibroseis data quality, it is crucial to evaluate each element in the vibroseis data acquisition system and ensure that the contribution from each element is successful. Vibroseis systems depend greatly upon the ability of vibrators to generate synchronous, repeatable ground-force sweeps over a broad frequency range. This requires that the reaction mass and the baseplate of the vibrator move as rigid bodies. However, rigid-body motion is not completely true for high- frequency vibrations, especially for the vibrator baseplate. In order to accurately understand the motion of the vibrator baseplate, a finite element analysis model of the vibrator baseplate and the coupled ground has been developed. This model is useful for simulating the vibrator baseplate dynamics, evaluating the impact of the baseplate on the coupled ground and vibrator baseplate design. Model data demonstrate that the vibrator baseplate and its stilt structure are subject to six significant resonant frequencies in the range of 10–80 Hz. Due to the low rigidity of the baseplate, the baseplate stilt structure experiences severe rocking motions at lower frequencies and the baseplate pad experiences severe flexing motions at higher frequencies. Flexing motions cause partial decoupling, which gives rise to increased levels of harmonic distortion and less useable signal energy. In general, the baseplate pad suffers more bending and flexing motions at high frequencies than low frequencies, leading less efficiency in transmitting the useable energy into the ground.