首页 | 本学科首页   官方微博 | 高级检索  
     

电感耦合等离子体发射光谱法测定石膏矿样品中的三氧化硫
引用本文:司银奎,李富华,吕有成. 电感耦合等离子体发射光谱法测定石膏矿样品中的三氧化硫[J]. 山东国土资源, 2016, 32(1)
作者姓名:司银奎  李富华  吕有成
作者单位:山东省第八地质矿产勘查院;山东省第八地质矿产勘查院;山东省第八地质矿产勘查院
摘    要:样品用稀盐酸处理,在酸性条件下石膏样品中的三氧化硫以硫酸根状态存在于待测溶液中,过滤除去酸不溶物。处理好的待测溶液可直接上等离子体发射光谱仪ICAP-6300(美国热电制造)上测定。方法的检出限为0.01%,采用本法测定国家标准物质GBW03109,GBW03109a,GBW03110,GBW03111a,结果表明标准样品测定的相对误差为-0.411%~0.274%,相对误差允许限为1.07%,能够满足分析质量要求。

关 键 词:三氧化硫;电感耦合等离子体发射光谱仪;精密度与准确度;石膏矿

Determination of Sulphur Trioxid in Gypsum Samples by Using Inductively Coupled Plasma Optical Emission Spectrum
SI Yinkui,LI Fuhua and LU Youcheng. Determination of Sulphur Trioxid in Gypsum Samples by Using Inductively Coupled Plasma Optical Emission Spectrum[J]. SHANDONG LAND AND RESOURCES, 2016, 32(1)
Authors:SI Yinkui  LI Fuhua  LU Youcheng
Abstract:In order to determine sulphur trioxid, first, the sample should be treated with dilute hydrochloric acid. Under acidic conditions, sulphur trioxid in the gypsum samples occurred in sulfate in testing solution as sulphate, then filtrated acid insoluble substances. After processing, the testing solution can be determined directly on the inductively coupled plasma atomic emission spectrometer. The detection limit of the determination method is 0.01%, and national standard materials are GBW03109, GBW03109a, GBW03110 and GBW03111a. It is showed that the relative error of standard sample is 0.26%~0.69%, allowed limit of relative error is 1.45% which can meet the quality requirements.
Keywords:Sulfur trioxide   inductively coupled plasma atomic emission spectrometry   precision and accuracy   gypsum
本文献已被 CNKI 等数据库收录!
点击此处可从《山东国土资源》浏览原始摘要信息
点击此处可从《山东国土资源》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号