| KSC-127射流式液动锤在科钻一井中的应用分析 |
| |
| 引用本文： | 李发东.KSC-127射流式液动锤在科钻一井中的应用分析[J].地质科技情报,2006,25(6):107-111. |
| |
| 作者姓名： | 李发东 |
| |
| 作者单位： | 中国地质大学研究生院,武汉,430074;中原油田钻井三公司,河南,兰考,457300 |
| |
| 摘 要： | 大陆科钻一井所钻遇的岩石主要有榴辉岩、花岗片麻岩、角闪岩.岩石坚硬、研磨性强;花岗片麻岩为强致斜岩层.因此,钻进效率低,回次进尺短,孔斜不易控制.采用大陆科钻中心组织研制的液动锤螺杆马达组合新型钻具后,钻进中破碎岩石的方式以冲击破碎为主,大大改变了钻进效率低、回次进尺短和孔斜难控制的现象,取得了良好的钻进效果.同时,也发现射流式液动锤存在不足之处.针对射流式液动锤的优缺点进行了较深入、全面的分析,提出了有效的改进措施.
|
| 关 键 词： | 射流式液动锤 回次进尺 孔斜 |
| 文章编号： | 1000-7849(2006)06-0107-04 |
| 收稿时间： | 2006-06-31 |
| 修稿时间： | 2006年6月30日 |
Application of the KSC-127 Jet Hydro-Hammer in Well CCSD-1 |
| |
| LI Fa-dong.Application of the KSC-127 Jet Hydro-Hammer in Well CCSD-1[J].Geological Science and Technology Information,2006,25(6):107-111. |
| |
| Authors: | LI Fa-dong |
| |
| Institution: | 1. Graduate School, China University of Geosciences , Wuhan 430074,China ;2.Third Branch of Zhongyuan Drilling Company, Lankao Henan 457300, China |
| |
| Abstract: | The drilling formation in well CCSD-1(Chinese Continental Scientific Drilling Project) consists of ultrabasic crystalline rocks such as eclogite and granite gneiss.Especially,its hardness and strong abrasiveness often leads to short drilling footage per round trip and thus low drilling efficiency.Also it is difficult to control hole deviation.An new-type drill assembly is developed by CCSD Center,consisting of hydro-hammer and screw motor.When this assembly is applied,rocks are broken mainly by impact fragmentation.This not only helps the control of hole deviation but also improve the footage and drilling efficiency.However the jet hydro-hammer still have some problems.This paper puts forward som measures for the improvement of the jet hydro-hammer based on teh analysis of its advantages and shortcomings. |
| |
| Keywords: | jet hydro-hammer footage per round trip hole deviation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
