Behavior of Weak Soils Reinforced with End-Bearing Soil-Cement Columns Formed by the Deep Mixing Method |
| |
| Authors: | Ahmad Safuan A. Rashid Jonathan A. Black Hisham Mohamad Norhazilan Mohd Noor |
| |
| Affiliation: | 1. Faculty of Civil Engineering, Universiti Teknologi Malaysia, Johor Bahru, Malaysiaahmadsafuan@utm.my;3. Department of Civil and Structural Engineering, University of Sheffield, South Yorkshire, UK;4. Faculty of Civil Engineering, Universiti Teknologi Malaysia, Johor Bahru, Malaysia |
| |
| Abstract: | This article reports on a series of small-scale, plane strain, 1 g physical model tests designed to investigate the bearing capacity and failure mechanics of end-bearing soil-cement columns formed via Deep Mixing (DM). Pre-formed soil-cement columns, 24 mm in diameter and 200 mm in length, were installed in a soft clay bed using a replacement method; the columns represented improvement area ratios, ap, of 17%, 26%, and 35% beneath a rigid foundation of width 100 mm. Particle Image Velocimetry (PIV) was implemented in conjunction with close-range photogrammetry in order to track soil displacement during loading, from which the failure mechanisms were derived. Bearing capacity performance was verified using Ultimate Limit State numerical analysis, with the results comparing favorably to the analytical static and kinematic solutions proposed by previous researchers. A new equation for bearing capacity was derived from this numerical analysis based on the improvement area ratio and cohesion ratio of the soil column and ground model. |
| |
| Keywords: | bearing capacity deep mixing end-bearing soil-cement column particle image velocimetry ultimate limit state |
|
|
